OUR PRODUCTS
H-type ladder DH
Categories: All categories, Guide rails & fixed laddersSKU: N/A
Structures | Building, Other, Shaft, Tower |
---|---|
Fastening surface | Concrete, Masonry, Other, Steel |
Surface of the substrate | Other, Plane (flat), Round (tube), Steel grid |
Fall protection | Fixed ladder |
Fall protection material | Anodized aluminum, Stainless steel, Steel hot dipped galvanized |
Double stile ladder with integrated guide rail incl. Profile connector with locking tabs and screws
- Available in aluminum, steel and stainless steel
- All rungs are ergonomically shaped; for a safe step
- Conforming arrester system type Twinstop®
3 variants for your requirements
Note on mounting distance: Max. 1400mm – empfolen 1120mm | max. 267mm from conductor end without / max. 1434mm with reinforcement profile
DH-ST
Steel St-tZn, hot-dip galvanized (1.0037)
- Rung spacing: 280mm
- Step width per side: 150mm
- Rung surface: perforated and anti-slip
- Side rail: Ø27mm with plug-in connection
- Guide rail: 50x32mm
- Catch distance: 140mm
- Overall size (bxt): 405x50mm
- Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
- Weight: 6,8kg/m
- Minimum bending radius of 1000mm possible for segments
DH-VA
Stainless steel, pickled (1.4401/1.4571)
- Rung spacing: 280mm
- Step width per side: 150mm
- Rung surface: perforated and anti-slip
- Side rail: Ø27mm with plug-in connection
- Guide rail: 50x32mm
- Catch distance: 140mm
- Overall size (bxt): 405x50mm
- Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
- Weight: 6,8kg/m
- Minimum bending radius of 1000mm possible for segments
DH-AL
Aluminum, anodized (3.3206)
- Rung spacing: 280mm
- Step width per side: 150mm
-
Sprout surface:
anti-slip - Side rail: 30x12mm with clamp connection
- Guide rail: 52x51mm
- Catch distance: 140mm
- Overall size (bxt): 399x51mm
- Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
- Weight: 4,1kg/m
- Minimum bending radius of 3000mm possible for segments
These components you need for your fall protection system
- Guide rail or ladder with integrated guide rail
- Fastening element
- Profile connector
- Climbing lock bottom 12 kN
- Climbing lock top 12 kN
- Identification plate
- Collecting device