OUR PRODUCTS

H-type ladder DH

Structures	Building, Other, Shaft, Tower
Fastening surface	Concrete, Masonry, Other, Steel
Surface of the substrate	Other, Plane (flat), Round (tube), Steel grid
Fall protection	Fixed ladder
Fall protection material	Anodized aluminum, Stainless steel, Steel hot dipped galvanized

Double stile ladder with integrated guide rail incl. Profile connector with locking tabs and screws

DOWNLOAD

Note on mounting distance: Max. 1400mm – empfolen 1120mm | max. 267mm from conductor end without / max. 1434mm with reinforcement profile

Steel St-tZn, hot-dip galvanized (1.0037)

Rung spacing: 280mm
Step width per side: 150mm
Rung surface: perforated and anti-slip
Side rail: Ø27mm with plug-in connection
Guide rail: 50x32mm
Catch distance: 140mm
Overall size (bxt): 405x50mm
Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
Weight: 6,8kg/m
Minimum bending radius of 1000mm possible for segments

Stainless steel, pickled (1.4401/1.4571)

Rung spacing: 280mm
Step width per side: 150mm
Rung surface: perforated and anti-slip
Side rail: Ø27mm with plug-in connection
Guide rail: 50x32mm
Catch distance: 140mm
Overall size (bxt): 405x50mm
Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
Weight: 6,8kg/m
Minimum bending radius of 1000mm possible for segments

Aluminum, anodized (3.3206)

Rung spacing: 280mm
Step width per side: 150mm
Sprout surface:
anti-slip
Side rail: 30x12mm with clamp connection
Guide rail: 52x51mm
Catch distance: 140mm
Overall size (bxt): 399x51mm
Segment length: 1120-4480mm in increments of 280mm; standard lengths: 2240mm, 2800mm, 4480mm
Weight: 4,1kg/m
Minimum bending radius of 3000mm possible for segments